ALUMINUM
To keep the product in good condition for a long time, we recommend a correct periodic cleaning, particularly frequent in places characterized by high humidity and marine climate. It is recommended to clean the surfaces with a soft cloth using water or neutral detergents. Prolonged and uninterrupted exposures to intense UV radiation or very low temperatures can affect the initial characteristics of the colored aesthetic coating made of polyester. We recommend cleaning and storing the products in sheltered places during periods of prolonged non-use and in winter.
ECO LEATHER
For correct maintenance it is recommended to clean with neutral products and a non-abrasive cloth. Eco-leather is a material that over time can be enriched with small signs that testify to its use and characterize the charm and aesthetic appearance of the product in its normal use.
EMU-TEX
Avoid prolonged contact with greasy substances and / or dyes that could be absorbed by the covering material and give rise to permanent stains, as well as deteriorate the structure of the yarn. Frequent washing: use water and non-abrasive liquid detergents with neutral pH and colorless. If necessary, leave the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not exceeding 30 ° C. In the case of using pressure devices, keep the tip of the diffuser at a distance of at least 60/70 cm from the surface of the product. If necessary, repeat the operation. Periodic and / or extraordinary washing: use a regenerating stain remover for PVC, according to the following procedure. Operations to be carried out: - apply the stain remover to the dirty cloth; - let the product act for 15-30 minutes; - scrub the stained areas with a common hard-bristled laundry brush (this step is necessary since the dirt is inside the texture); - rinse with running water (if possible rinse with a pressure cleaner keeping a distance of about 60 cm so as not to damage the cloth with high pressure); - if necessary, repeat the operations. Notes: when applying the product, be careful not to apply it to the painted parts of the product.