Lettino da sole Emu Tiki

Maintenance

ALUMINUM

To keep the product in good condition for a long time, we recommend correct periodic cleaning, particularly frequent in areas characterized by high humidity and a marine climate. It is recommended to clean the surfaces with a soft cloth using water or neutral detergents. Prolonged and uninterrupted exposure to intense UV radiation or very cold temperatures can affect the initial characteristics of the colored aesthetic coating made of polyester. We recommend cleaning and storing the products in sheltered places during prolonged and winter periods of inactivity.

EMU-TEX

Avoid prolonged contact with greasy substances and/or dyes which could be absorbed by the covering material and give rise to permanent stains, as well as deteriorate the structure of the yarn. Frequent washing: use water and non-abrasive liquid detergents with neutral PH and colorless. If necessary, leave the cleaner to take effect for a few minutes. Rinse thoroughly with water at a temperature not exceeding 30°C. If pressure devices are used, keep the tip of the diffuser at a distance of at least 60/70 cm from the surface of the product. If necessary, repeat the operation. Periodic and/or extraordinary washing: use a regenerating stain remover for PVC, according to the following procedure. Operations to carry out: – apply the stain remover to the dirty fabric; – let the product act for 15-30 minutes; – rub the stained areas with a common hard-bristled laundry brush (this phase is necessary because the dirt is inside the texture); – rinse with running water (if possible, rinse with a pressure washer keeping a distance of about 60 cm so as not to damage the sheet with the high pressure); – repeat the operations if necessary. Notes: when applying the product, be careful not to apply it to the painted parts of the product.