The characteristics of the Snooze collection are the large dimensions and the sinuous and enveloping shapes. The structure is made of tubular steel, available in different colors combined with fabric variants. All metal components are isolated from each other with plastic elements. The collection consists of: deckchair, director's chair, footrest and stackable sunbed.
Maintenance
STEEL
To keep the product in good condition for a long time, we recommend storing it in closed, dry places over the winter in order to avoid the formation of condensation. Before the winter season and every three months, if the products are stored near the sea, it is recommended to clean the metal surfaces with a soft cloth using water or detergents and protect them with vaseline oil or car wax.
EMU-TEX
Avoid prolonged contact with greasy substances and/or dyes which could be absorbed by the covering material and give rise to permanent stains, as well as deteriorate the structure of the yarn. Frequent washing: use water and non-abrasive liquid detergents with neutral PH and colorless. If necessary, leave the cleaner to take effect for a few minutes. Rinse thoroughly with water at a temperature not exceeding 30°C. If pressure devices are used, keep the tip of the diffuser at a distance of at least 60/70 cm from the surface of the product. If necessary, repeat the operation. Periodic and/or extraordinary washing: use a regenerating stain remover for PVC, according to the following procedure. Operations to carry out: – apply the stain remover to the dirty fabric; – let the product act for 15-30 minutes; – rub the stained areas with a common hard-bristled laundry brush (this phase is necessary because the dirt is inside the texture); – rinse with running water (if possible, rinse with a pressure washer keeping a distance of about 60 cm so as not to damage the sheet with the high pressure); – repeat the operations if necessary. Notes: when applying the product, be careful not to apply it to the painted parts of the product.